|
GENERALLY THE
MECHANISM HAS BEEN RESELECTED WITH LATEST TECHNOLOGY TO INCREASE
EFFICIENCY, AND RUN THE MACHINE ARE INTERCHANGEABLE. ALL BORE ARE VERY
CLOSELY REAMED, DOUBLE BALL BEARING ARE FITTED IN DISC ARM, AT ITS
CONNECTION WITH THE DISC, THE MAIN CRANK-SHAFT RUNS IN HEAVY DUTY TAPER
ROLLER –BEARING.
THE BED:
is of heavy dimension provided with guide way for the vice, to clamp the
work pice. One jaw of the vice is fixed while the other is adjusted
according to the material diameter.
SAW
FRAME: is of rigid construction and runs in prismatic guide
insuring a square and parallel cut. The cut takes place on draw stroke,
and the blade, and cut all types of metal which are machinable of all
strength.
FEED:
Two levers are provided at the dash-pot. The small lever regulates the
rate feed, while the other big one enables the slide to start cutting or
to be raised the slide automatically, on completion of the cutting cycle
and the motor switched off automatically.
SPEED:
A Two speed drive mechanism is incorporated for the selection of the
most suitable speed for the material being cut. Cooling the machine
comes with a very reliable and efficient centrifugal pump, for quick
cooling the Blade. It comes with connection pipes from water tank to
stay put on the work pice. The pump is driven by a intermediate drive.
STANDARD: All machines are supplied with centrifugal water pump, Motor-pully
Motor-plate, but without ACCESSORIES ‘V’ belts and Electricals.
EXTRA:
Angular vice simple, Angular vice with Graduation, Electric-motor and
starter, ‘V’ belts Blades.
ACCESSORIES direct on line push-button. Starter can be
incorporated which sets into motor an adjustable trip mechanism which
stops the machine as soon as the blade is clear from work. The
non-productive time is reduced to minimum. |